Filling The Water Tank - Rowenta PRECISION VALET IS9100D1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
ttaching Steam hose to the main
unit :
1) Insert hose plug into hose connector on main unit.
2) Secure hose connector by pulling clamping ring
upwards.

Filling the water tank

• Ensure that the steamer is unplugged. Remove the
water tank from the base of the appliance by pulling it
upwards. Unscrew the lid and fill the tank. The tank
holds 128 ounces.
IMPORT NT
Never use water that contains additives (starch, per-
fume, aromatic substances, softener, etc) in the stea-
mer. dditives such as these can affect the properties of
the steam and lead to the formation of deposits.
• The steamer is designed to be used with T P W TER . If
the water in your area is hard, Rowenta recommends
that you mix half tap water and half distilled water,
which reduces the hardness; or just use inexpensive
bottled spring water.
• fter closing the lid, place the water tank on the base of
the appliance.
Tips
• We recommend checking the garment care label for manufacturer recommenda-
tions. We also recommend testing the garment on an unobtrusive area such as an
inner seam.
• Read the recommendations for the maintenance of the fabrics on the labels of the
clothing to be steamed.
• Test the strength of the colour of the fabric on an area of the garment that is not visi-
ble (inside of a hem).
• void contact between the steam head and silk or velvet.
• Certain garments are smoothed more easily on the reverse side.
• If you are using the steam head at a position close to the ground, raise the hose fre-
quently in order to avoid the formation of condensation.
You may hear a gurgling noise if the hose is obstructed in any way.
• Heavy fabrics may need to be steamed longer.
• Be careful at all times.
Use
Warning: Never steam a garment while it is being worn.
The hose and steam head may become hot during use.
This is perfectly normal. Be careful and avoid any pro-
longed contact.
• Only operate the steamer on the floor clear of any mate-
rials which may obstruct the base of the steamer (flat
and horizontal surface). Do not obstruct the openings on
the lower part of the appliance.
• If necessary, expand the poles to the desired height by
unlocking them, pulling them gently and locking them
again. Unlock the four clips while keeping integrated
hanger in your hand.
• Plug in the power cord and turn on the power using the
foot operated pedal. The power light will illuminate. The
steamer is operating.
* epending on the model: these accessories are specific to certain models or available as an option.
1
4
2
CLIC

Publicidad

Tabla de contenido
loading

Tabla de contenido