Front And Rear Panel Features - Tripp-Lite SmartOnline SU20KX El Manual Del Propietario

4 – Front and Rear Panel Features
Note: Individual models may vary from diagrams. Unit shown with front bezels removed.
• Control Panel: The control panel allows the operator to monitor and control the UPS system. See
A
more information.
• Internal Power Modules: 20kVA internal power modules can be replaced in the field without powering down connected equipment loads.
B
The number of internal power modules varies by model. The internal power modules are capable of N+1 redundancy in SU40KX, SU60KX
and SU80KX models.
• Internal Battery Pack Compartment (SU20KX and SU40KX only): Internal batteries must be connected by a qualified electrician. See
C
Section 6 – Internal Battery Connection
• Output Circuit Breaker Switch (Q4): Controls AC output power.
D
• E Manual Bypass Circuit Breaker Switch (Q3): Controls AC input power to the UPS system during manual bypass operation.
• Bypass Input Circuit Breaker Switch (Q2): Controls AC input power to the UPS system during auto bypass operation.
F
• Main Input Circuit Breaker Switch (Q1): Controls AC input power to the UPS system during online (normal) operation.
G
• Levelers: The levelers provide long-term support for the UPS system.
H
• Casters: The casters are designed for small position adjustments within the final installation location only; they are not designed for moving
I
the UPS system over longer distances. The casters are not designed to provide long-term support for the UPS system after final installation.
Use the levelers to provide long-term support.
A
B
C
E
D
H
I
SU40KX shown (front)
for more information.
7
F
G
H
I
Section 3 – Control Panel Features
1
2
3
4
5
6
7
for
8
9
10
11
12
13
14