Skil F0150711 Serie Manual Original página 12

Lawn mower/trimmer
INTRODUCTION
• This tool is intended for domestic lawn mowing only
• This tool is not intended for professional use
• Check whether the packaging contains all parts as
illustrated in drawing 2
• When parts are missing or damaged, please contact your
dealer
• Read this instruction manual carefully before use
and save it for future reference 4
TECHNICAL DATA 1
TOOL ELEMENTS 3
A Bolt for mounting guide handle
B Adjustable guide handle
C Cord restraint
D Cord clip
E Grass box
F Safety switch
G Trigger switch
H Ventilation slots
J Rear guard
K Cutting blade
SAFETY
GENERAL
• This tool can be used by
children aged 8 and above and
by persons who have physical,
sensory or mental limitations
or a lack of experience or
knowledge if a person
responsible for their safety
supervises them or has
instructed them in the safe
operation of the tool and they
understand the associated
dangers (otherwise, there is a
danger of operating errors and
injuries)
• Supervise children (this will
ensure that children do not play
with the tool)
• Cleaning and user
maintenance of the tool shall
not be made by children
without supervision
• Be familiar with the controls and the proper use of the tool
• Never operate the tool in the direct vicinity of persons;
stop using the tool when persons (especially children) or
0711/0712
pets are nearby
• The user is responsible for accidents or hazards
occurring to other people or their property
• Use only accessories and replacement parts
recommended by SKIL
• Always disconnect plug from power source during work
breaks or before cleaning, maintenance, making
adjustments and changing accessories, in order to
reduce the risk of starting the tool accidentally
ELECTRICAL SAFETY
• Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
• Only use an extension cord of types H05VV-F or
H05RN-F which is intended for outdoor use and
equipped with a watertight plug and coupling-socket
• Only use extension cords with a maximum length of 40
metres (1,0 mm²), 60 metres (1,5 mm²) or 100 metres
(2,5 mm²)
• When operating the tool use a residual current device
(RCD) with a triggering current of 30 mA maximum
• Do not run over, crush or pull the (extension) cord
• Protect the (extension) cord from heat, oil and sharp
edges
• Do not connect a damaged cord to the power source or
touch a damaged cord before it is disconnected from the
power source (damaged cords can lead to contact with
live parts)
BEFORE USE
• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool
• Inspect the cord periodically and have it replaced by a
qualified person, if damaged
• Inspect the extension cord periodically and replace it, if
damaged (inadequate extension cords can be
dangerous)
• Never use the tool when cord is damaged; have it
replaced by a qualified person
• Never operate the tool with a defective rear guard or
defective grass box
• Regularly check for defects such as loose, dislodged or
damaged blade, loose fixings, and worn or damaged
components
• Have worn or damaged components replaced in sets to
preserve balance
• Never replace the plastic blades with metallic
blades
• Do not operate the tool when barefoot or wearing open
sandals; always wear sturdy shoes and long trousers
• Avoid wearing loose-fitting clothing that is loose-fitting,
hanging cords or ties
• Thoroughly inspect the area where the mower is to be
used and remove all hard objects which could be caught
up and thrown by the cutting mechanism
DURING USE
• Keep the (extension) cord away from the rotating
cutting blade
• Avoid using the tool in bad weather conditions, especially
when there is a risk of lightning
12