Lower Anchor Installation - Britax B-SAFE GEN2 Guia Del Usuario

BRITAX Child Safety, Inc.

Lower Anchor Installation

1. Press and hold lower
connector release button
and pull lower connectors
firmly to remove from their
storage in the base.
2. Lengthen lower connector
straps.
NOTE: When lengthening
the strap be careful not to
twist prior to connecting
to adjacent vehicle lower
anchor.
3. Place the base on the
vehicle seat and press
the lower connectors
onto their adjacent
vehicle lower anchors
until a click is heard.
NOTE: Pull the lower
connectors to verify they
are secure.
4. While pressing the
center of the base into
the seat, pull up on the
lower connector straps to
tighten.
12
Table of Contents