Lap-Shoulder Belt Installation - Britax B-SAFE GEN2 Guia Del Usuario

BRITAX Child Safety, Inc.

Lap-Shoulder Belt Installation

IMPORTANT:
determine how to lock your vehicle belt system.
* If you cannot lock your vehicle seat belt you must use a
locking clip. Locking clips are available from BRITAX at
1-888-427-4829 or 1-704-409-1699.
1. Secure your child in the
infant car seat before
installing the car seat in
the vehicle.
2. Place the infant car seat
rear facing on the vehicle
seat.
3. Pull the vehicle belt
out and only route the
lap portion through the
carrier only belt guides.
4. Verify that the vehicle
belt is not twisted and
buckle. Lock your
vehicle seat belt system
as instructed by your
vehicle owner's manual.
22
Check your vehicle owner's manual to
Table of Contents