Remote Control; Description Of The Functions - Suntec Wellness Klimatronic PROGRESS 7.000 ECO R290 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
1. ON/OFF: Please press the button to switch the unit on or off. When switched on, the unit automatically starts
with the previous settings.
2. MODE: After activation, please press the unit's mode button to select between cooling, heating,
dehumidification or fan mode. Please note that the heating function is only available on the "14208 PROGRESS
12.000 Eco R290" model.
3. FAN: After activation of the unit, please press this button to set the speed of the fan (high, medium or low).
4. UP/DOWN buttons (+ / -) Please set the unit to the cooling mode and adjust the desired room temperature
(18-32 °C or 64-90 °F) with the use of these buttons. Please press both buttons simultaneously for at least
3 seconds to switch the temperature display between Celsius and Fahrenheit.
5. TIMER: Please press this button and set the desired activation/deactivation time.

Remote control:

The same settings can be performed using the remote control as with the control panel.
Powered by 2 x AAA batteries (not included)

Description of the functions

Cooling mode
Please press the mode button until the cooling mode indicator lights up.
Please press the UP/DOWN buttons to set the desired temperature (18-32 °C or 64-90 °F). The target
temperature is shown on the display.
Please press the fan button to set the speed of the fan (high, medium or low). The corresponding speed
indicator lights up.
Heating mode (only available on the "14208 PROGRESS 12.000 Eco R290" model)
Please press the mode button until the heating mode indicator lights up.
Please press the UP/DOWN buttons to set the desired temperature (13-27 °C or 55-81 °F). The target
temperature is shown on the display.
Please press the fan button to set the speed of the fan (high, medium, low or automatic). The automatic
speed adjusts the speed according to the ambient temperature. The corresponding speed indicator lights
up.
Fan mode
Please press the mode button until the fan mode indicator lights up.
On/off button
Mode button
Sleep mode (can only be set via the remote control)
UP button
DOWN button
Fan speed
Timer
Temperature setting Celsius/Fahrenheit
Swing (can only be set via the remote control)
Please press the swing button in order to activate or deactivate the automatic vertical
movements of the louvers.
19

Publicidad

Tabla de contenido
loading

Tabla de contenido