GM 17803349 Manual Del Usuario

Cargo Net: Bed Net Dividing System
A cargo net in the rear of your vehicle helps keep small items in
place during sharp turns or quick stops and starts. The net is
not designed to retain these items during off road use. The net
is not for larger, heavier items.
Installation Instructions:
1. Locate the 5 Cargo Bed sidewall trim, push pin plugs as
shown.
2. Remove each Cargo Bed sidewall trim, push pin plug as
shown and replace with the mushroom attachment anchors
provided with the net kit. Repeat for other side of Cargo Bed
sidewall.
Cargo Net: Bed Net Dividing System
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11 30NO05 Initial Release - per ECA P5E00571
WHITE 16 POUND NON-BOND
C
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION AUTH
3. Attach the cords to the sidewall attachment anchors as
shown. Attach the net hooks to the cord loops as shown.
4. The net can be placed towards the front; middle and rear
within the Cargo Bed area.
5. The net can be placed along the Cargo Bed Side walls by
attaching the net hooks to the sidewall cargo tie-down D-
rings.
IR 30NO05
PART NO.
INSTALLATION INSTRUCTIONS
DR
TITLE
Cargo Net: Bed Net Dividing System
PART NO.
17803349
6200 Grand Pointe Dr., Grand Blanc, MI 48439
1
17803349
SHEET
1
SHEET
3
OF
3
OF