Maxi-Cosi Emerald i-Size Instrucciones De Uso página 66

EN
A - Seat cover
B - Adjustable headrest
C - Headrest adjustment handle
D - Newborn inlay - exclusively for use with
Emerald from 40 to 75 cm
E - Removable shoulder pads
F - 5-point Harness
G - Harness buckle
H - Crotch pad
I - Harness adjuster button
J - Harness adjuster strap
K - Recline handle
L - Car seat release button
M - Indicator car seat locked in place
N - Support leg
O - Support leg adjuster button
P - Support leg height adjustment rack
Q - Support leg indicator
R - G-CELL
S - ISOFIX connectors
T - ISOFIX connectors activation button
U - ISOFIX connectors release handle
V - User manual storage compartment
SAFETY
• The Emerald is intended for car use only.
• The Emerald is developed for an intensive use
of approximately 12 years.
• Do not use any load bearing contact points
other than those described in the instructions
and marked in the child restraint.
I I
66 Emerald Maxi-Cosi
The Emerald car seat in the car:
• Before buying this product make sure the car
seat is compatible with the vehicle it is to be
used in.
• The car seat must be installed with support leg
until your child's length is 105 cm and weight is
max. 17,5 kg.
• When the support leg is used, it must always
be unfolded completely, locked and placed in the
most forward position.
WARNING:
• The base is intended for use with the Emerald
car seat only. Do NOT fit any other car seat on
the Emerald base.
• When installing the car seat, spaces between
the base of the car seat and the vehicle seat
are possible depending on the position of the
anchorage points within the vehicle.
• If you use the Emerald on the front seat, it is
mandatory to deactivate the airbag of the seat
in question and move the passenger seat back to
a maximum (Please consult your car manual).
• It is prohibited to adjust the seat position while
travelling.
• It is prohibited to recline the car seat when
your child is larger than 87 cm and is travelling in
rearward facing position.