Chapter 1. Important Safety Instruction; Environments - Hiti M610 Manual Del Usuario

Chapter 1. Important Safety Instruction

This manual provides detail instructions for the safety use of the printer.
Please read this manual carefully before operating the printer to ensure having proper use.
In this manual, there are notes that require special attention. For your safety operation, Safety Notices
are separated as follows;
Inappropriate handling can cause serious wounds and/or physical damage to the users.
Explanation about the cause of the trouble and the environmental condition.
◆ It is difficult to forecast all the danger in setting and use of the printer. Therefore, warnings in this
Operation Manual, in the other documents on the printer cannot cover all the cases. In case of
performing the operation or maintenance which is not described in this manual, all the concern for
the safety have to be taken care of at the customer side.
◆ Operation and the notification for the maintenance described in this manual and other documents
are for the proper use of the printer. In case of using the printer for the other purpose, all the
concern for the safety has to be taken care of at the customer side.
◆ Do not perform the operation which is prohibited in this manual and other document.
◆ The contents that cannot be printed due to a failure while using the use of this printer are not
guaranteed.

Environments

To use the printer safety, please pay attention to the followings:
Do not let children to touch the printer or cables. It may cause accidents or electric shock.
Do not place the printer under a humid or dusty place. It can cause a fire, electric shock
or printer problem. Do not place the printer with dust, sand and high humidity such as
bathing place, bathroom, hot spring, or on the street.
Do not place the printer on rickety place and/or inclined place. Printer may fall down or
tumble and it can cause serious injury.
Do not place the printer under the low temperature such as ski yard, skating rink or open-air
with direct sunlight.
Do not put vase, flowerpot, and cup or anything contents water or metric items on the printer.
Water spilt or metallic items fall into the printer may cause the fire and electric shock. In case the
water spilt or metallic items fall into the printer, please turn off the printer power immediately.
Do not block the openings of the printer. In case, the opening blocked, the heat will
remain inside and it can cause the fire.
HiTi M610 User Manual
1 - 1
English