Parts Name And Function - Hiti M610 Manual Del Usuario

Parts Name and Function

Front View
NO. Name
Open Lever
1
Printer Status LEDs
Front Cover
Dust Box
4
Power Switch
5
Power Connector
USB Connector
7
Paper Setting LED
8
①
②
③
④
⑧
When open the Front Cover, hold this lever.
Printer status display LEDs are located on the panel.
Open the Front Cover when replacing an ink ribbon or
paper, or when performing maintenance.
The Dust Box stacks trim dusts.
This switch turns on/off the power of the printer.
<Caution> Once the printer is turned off,
wait at least 3 seconds before turning it on again.
To be used to connect the power cable.
To be used to connect the USB cable.
When setting the paper, insert the paper until the LED is lit.
When the LED blinks, remove the paper until the LED goes off.
HiTi M610 User Manual
⑤
⑥
⑦
Function
2 - 2
English
Side view
Inside view