Metz MECABLITZ 44 AF-3 C Manual De Instrucciones página 32

REAR
1
Fig. 15 / Grabado 15
REAR
3
Fig. 16 / Grabado 16
2
4
32
automatically deleted. Please also refer to
the camera's instruction manual.
Switching on the REAR mode (Fig. 15)
• Continue depressing the „Select" key combinati-
on (= „Mode" key + „Zoom" key) until „REAR"
appears on the LC display.
• Continue depressing the „Zoom" key until „ON"
flashes on the LC display.
• The setting becomes immediately effective. The
LC display is returned its normal state after
approx. 5 sec.
The „REAR" symbol for 2nd curtain synchroni-
sation continues to be indicated on the mecablitz
LC display after it has been set.
Always use a tripod to avoid camera shake
with slow shutter speeds! Do not forget to
switch off this function after exposure, other-
wise unintended slow shutter speeds will
conntinue to be used for „normal" flash
shots.
Switching off the REAR mode (Fig. 16)
• Continue depressing the „Select" key combina-
tion (= „Mode" key + „Zoom" key) until „REAR"
appears on the LC display.
• Continue depressing the „Zoom" key until
„OFF" flashes on the LC display.
• The setting becomes immediately effective. The
LC display is returned to its normal state after
approx. 5 sec.
The „REAR" symbol for 2nd curtain synchronisa-
tion is no longer indicated by the mecablitz dis-
play. The mecablitz is then once again synchroni-
sed with the first curtain (normal synchronisation).