Dash Disassembly - Metra 95-8218S Instrucciones De Instalación

1. Turn the shift knob
counterclockwise to remove.
2. Unclip and remove the (2) trim
panels on each side of the pocket
below the radio/climate control
assembly. (Figure A)
3. Unclip and remove the shift knob
trim panel. (Figure B)
4. Unclip and remove the top of the
center console including the cup
holders. (Figure B)
5. Remove (2) Phillips screws from
each side of pocket below the
radio/climate control assembly.
(FigureC)
6. Unclip and remove the pocket.
(Figure C)

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
95-8218S
7. Unclip and remove the a/c vents
above the radio. (Figure D)
8. Remove (2) 10 mm bolts above the
radio (behind a/c vents) and (2) 10
mm bolts below climate control
(behind pocket) then remove radio/
climate control assembly.
(Figure E)
9. Remove the (6) Phillips screws
securing the brackets and climate
control to the radio. (Figure F)
10. Unscrew and remove the (2) clips
from the back of the factory radio.
(Figure F)
Continue to kit assembly
2
(Figure D)
(Figure E)
(Figure F)