Kit Assembly - Metra 95-8218S Instrucciones De Instalación

Double DIN head unit provisions
1. Align the small legs on the bottom
of the radio housing with the slots
in the top of the climate control
then slide the climate control
sideways to engage together.
(Figure A)
2. Attach the (2) clips removed in
step 10 in dash disassembly to the
radio housing using the supplied
(4) #4 x 3/8" Phillips screws.
(Figure A)

Kit Assembly

(Figure A)
95-8218S
3. Slide the DDIN radio unit into the
factory bracket/radio housing/
climate control assembly and
secure the unit using the screws
supplied with the head unit.
(Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
3
(Figure B)