Maintenance Precautions
1.
DO NOT store the blood pressure monitor in locations exposed to direct
sunlight, high temperatures (over 60°C), low temperatures (below -20°C),
high relative humidity (over 95%) or excessive amounts of dust.
Make sure to store the blood pressure monitor, where children, pets and or
pests are not there.
2.
DO NOT drop the blood pressure monitor or the cuff and subject it to other
shocks or vibration.
3.
Remove the batteries if the monitor will be left unused for a long period.
4.
DO NOT attempt to disassemble the monitor or the cuff.
5.
DO NOT bend the cuff or the air hose excessively.
6.
If the monitor and the cuff are very dirty, wipe them clean with a cloth moistened
with a neutral detergent. Then wipe them with a dry cloth.
7.
NEVER clean the blood pressure monitor with alcohol, thinners or benzene, as
this could damage the monitor.
8.
To clean the cuff, wipe it with a moist cloth. Avoid hard rubbing, as this will
cause air leakages. Take care also not to get water into the air hose.
Warning
Symbols Explanation
: The CE marking is meant to provide information to market inspectors
in the EU member countries.
: Type BF applied part (The cuff is type BF applied part.)
: Keep dry
: Warning
: Refer to instruction manual before use
: Appliance compliance WEEE directive
: Manufacturer
Warning
Nature and frequency of maintenance:
This product is designed for use over an extended period of time;
however, it is generally recommended that it be inspected every two years to ensure
proper function and performance.
No modification of this device is allowed.
The device has been tested and homologated in
accordance with EN60601-1-2 for EMC. This does not
guarantee in any way that the device will not be affected
by electromagnetic interference. Avoid using the device in
high electromagnetic environment.
- Eng 4 -