MIYOTA 0S90 Manual De Instrucciones página 2

STANDARD MEASUREMENT
Chronograph
minutes and
seconds are
read here
STOP
START
"A "
ACCUMULATED ELAPSED TIME MEASUREMENT
STOP
START
"A "
Chronograph
minutes and
seconds are read
here
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the chronograph 1/100 second hand and the chronograph
second hand do not return to zero position after the chronograph has been reset, and including after the
battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press button "A" to set the chronograph 1/100 second hand to zero position.
3. Press button "B" to set the chronograph second hand at 6 o'clock to zero position. The chronograph
hands can be advanced rapidly by continuously pressing button "A" or "B"
4. Once the hands have been zeroed, return the crown to the normal position.
* Do not push the crown to the normal position while the chronograph 1/100 second hand and the
chronograph second hand return to zero position. Each hands stop on the way when crown are returned
to the normal position and these positions are recognized as zero position.
When the measured time is less than 61 seconds
"A "
When the measured time
is over 61 seconds
When the measured time is less than 61 seconds
*Read in
"A "
chronograph
When the measured time
1/100 seconds
is over 61 seconds
Can be operated repeatedly
RESET
*Read in
chronograph
1/100 seconds
"A"
RESTART
"A" "A"
"B"
STOP RESET
"A" "B"