Operation Panel And Variable Speed Controller - HOLZMANN MASCHINEN KAM 45PRO Instrucciones De Servicio

13.2 Operation panel and variable speed controller

1 Mode °C and M/min
2 Mode °F and Ft/min
3 Heating indicator
light
4 Storage indicator
light
5 English- Metric mode
switch °C (M/min)-°F
(Ft/min)
6 Temperature lower
7 Temperature higher
8 Heating ON-OFF
9 Indicator light 120°C
(250°F) reached
10 Feeding speed
indicator light
11 Feeding switch /
speed controller on
handle
12 Target temperature
13 Current temperature
HOLZMANN MASCHINEN GmbH
The control light indicates the mode °C, the feeding speed unit
is in m/min.
The control light indicates the mode °F, the feeding speed unit
is in Ft/min.
The control light is on for the duration of the heating process.
After the heating is turned off
will be on, once the temperature falls below 140°F (60°C). You
can now store the machine in its original packaging.
By pressing the button once, the temperature is reduced by one
degree. A quicker temperature adjustment is achieved by
pressing continuously the button.
By pressing the button once, the temperature is increased by
one degree. A quicker temperature adjustment is achieved by
pressing continuously the button.
After pressing the main switch, press the "heating ON-OFF"
switch to turn the heating on or off.
As soon as the temperature of 120°C (250°F) is reached, the
indicator light will light up. Turning on the feeding switch can
accelerate the heating process.
The feeding speed can be adjusted within the range of 2.0-6.0
m/min (6.5-20 Ft/min).
Press the switch to turn ON/OFF the feeding roller motor.
Adjustment of the feeding speed: rotate the knob clockwise to
accelerate the feeding speed. Rotate the knob counter clockwise
to reduce the feeding speed.
Display of the intended operating temperature.
Display of the current heating temperature of the machine.
www.holzmann-maschinen.at
OPERATION
, the storage temperature light
26
KAM45PRO