Blind Hems - Singer ET-1 Manual De Instrucciones

BLIND HEMS

9 A-03 A-04
5mm
Reverse Overcasting
side stitches
1
2
4
5
F
5mm
Reverse
side
3
9: Blind hem for woven fabrics
A-03: Blind hem for stretch fabrics
A-04: Blind hem for stretch fabrics
Please Note: It takes practice to sew blind
hems. Always make a sewing test first.
1
Fold the fabric as illustrated with the wrong
side uppermost.
2
Place the fabric under the foot. Turn the
handwheel counter-clockwise by hand until
the needle swings fully to the left. It should
just pierce the fold of the fabric. If it does
not, adjust the stitch width accordingly.
3
Adjust the guide (b) by turning the knob (a)
so that the guide just rests against the fold.
4
Sew slowly, guiding the fabric carefully
along the edge of the guide.
5
Turn over the fabric.
36