Corded Buttonholes; Making A Buttonhole On Stretch Fabrics - Singer ET-1 Manual De Instrucciones

BUTTONHOLE SEWING
Making corded buttonholes
When sewing corded buttonholes, hook a heavy thread or cord under the buttonhole
foot.
1
2
Please Note: It is suggested that you use interfacing on the backside of the fabric.
1
Attach the buttonhole foot and hook the
gimp thread onto the back of the presser
foot. Bring the two gimp thread ends to the
front of the foot and insert them into the
grooves, then temporarily tie them there.
Lower the presser foot and start sewing.
Set the stitch width to match the diameter of
the gimp thread.
2
Once sewing is completed, pull the gimp
thread gently to remove any slack, then trim
off any excess.
41