Installing The Extension Table; Sewing On Heavy Fabric - Singer ET-1 Manual De Instrucciones

MORE FEATURES

Installing the extension table

1
3
Sewing on heavy fabrics
2
Cardboard or
thick fabric
1. Pull the sewing table and accessory box off
by sliding it to the left.
2. Follow the arrow, and stretch the foot of the
extension table.
3. Snap (A) of the extension table into (B) of
the machine.
The black button on the left side of the all
purpose presser foot will lock the presser foot
in a horizontal position if you push it in before
lowering the presser foot. This ensures even
feeding at the beginning of a seam and helps
when sewing multiple layers of fabric such as
sewing over seams when hemming jeans.
When you reach the point of an increased
thickness, lower the needle and raise the
presser foot. Press the toe of the foot and push
in the black button, then lower the foot and
continue sewing.
The black button releases automatically after
sewing few stitches.
You also can place another piece of fabric
with the same thickness at the back of the
seam. Or support the presser foot while
feeding by hand and sewing toward the
folded side.
32