Shure ULX-D Guia Del Usuario página 11

Menu Screens
Receiver Channel
1
① Receiver Information
Use DEVICE UTILITIES > HOME INFO to change the home screen display.
② Gain Setting
−18 to +42 dB, or Mute.
③ Mic. Offset Indicator
Indicates offset gain is added to the transmitter.
④ Transmitter Settings
The following information cycles when a transmitter is tuned to the
receiver's frequency:
- Transmitter Type
- Input Pad (Bodypack only)
- RF Power Level
- Transmitter Lock Status
- Transmitter Mute Status
Transmitter
1
2
x
3
① Transmitter Information
Scroll ▲▼ at the home screen to change the display
② Power Lock Indicator
Indicates power switch is disabled
③ Transmitter Audio Muted Indicator
Displayed when the transmitter audio is set to off using the MUTE MODE
feature.
System Gain Control
The gain control on the receiver sets the audio signal level for the entire system. This
allows adjustments to be made during a live performance. It is not necessary to change
the gain on the transmitter (mic offset) to optimize the gain structure. Any required
changes to gain should be made from the receiver.
7
6
5
2 3 4
9
8
7
4 5 6
⑤ Battery Runtime Indicator
Shure SB900 battery: runtime is displayed in minutes remaining.
AA batteries: runtime is displayed with a 5-bar indicator.
⑥ TV Channel
Displays the TV channel that contains the tuned frequency.
⑦ High Density Mode Icon
Displayed when High Density mode is enabled.
Transmitter Status
The following text or icons report transmitter status to the receiver
screen:
Display Icon Transmitter Status
Bodypack input is attenuated 12 dB
Offset gain is added to the transmitter
1 mW RF power level
Lo
10 mW RF power level
Nm
20 mW RF power level
Hi
Menu is locked
M
Power is locked
P
Displayed when the transmitter audio is set to off using
TxMuted
the MUTE MODE feature
No RF connection between a receiver and transmitter
-No Tx-
or transmitter OFF
④ Battery Runtime Indicator
- Shure SB900 battery: runtime is displayed in hours:minutes remaining
- AA Batteries: runtime is displayed with a 5-bar indicator
⑤ Menu Lock Indicator
Indicates menu navigation buttons are disabled
⑥ Mic. Offset
Displays microphone offset gain value
⑦ RF Power
Displays RF power setting
⑧ Bodypack Input Pad
The input signal is attenuated 12 dB
⑨ Encryption Icon
Indicates encryption is enabled on the receiver and has been transferred
to the transmitter from a sync
Press the ▲▼ gain buttons on
ULXD4
Digital Wireless Receiver
IR
the front of the receiver to incrementally adjust gain
from -18 to +42 dB.
audio gain
RF
AB
control RF audio gain power OL
A B
L
OL
OL
ENTER
EXIT
SCAN push
power
11