Installation Instructions; Principle Of Operation - STEINEL Studioline 400 Instrucciones De Montaje

L400_10spr.qxd

Installation Instructions

GB
Lights, alarms, and many
other things triggered by
movement – for your con-
venience and safety.

Principle of Operation

The built-in pyroelectric
infrared detector detects
the invisible heat radiation
that is emitted by moving
bodies (people, animals,
Focal points and angle of
sight of the 360° STEINEL
lens (with 120° angle of
aperture).
a) sensor lens directed
forwards.
wall
Monitoring zone A
8
18.02.2003 9:06 Uhr
At the front door, garage,
terrace or carport, in a
stairway, storeroom or
basement, this SensorLamp
etc.). This thermal radiation
is converted electronically,
and switches on the light
fixture. No thermal radiation
is detected through bar-
b) sensor lens directed
downwards.
12 m
(40 )
wall
Monitoring zone B
Seite 8
can be installed and ready
for operation quickly any-
where.
riers such as walls or
planes of glass. The fixture
is not switched on.
The most reliable motion
detection is achieved by
mounting or pointing the
unit to aim across the
direction in which a person
would walk, and so that no
hindrances such as trees or
walls obstruct the line of
sight.
Important: Teh max. reach
is best achieved if the top
row of lens segments is
positioned directly under
the housing.
c) sensor lens directed
backwards.
4 m
(12 )
wall
Monitoring zone C
1m (3 )