Publicidad
separated ends, ensuring the locking tabs fully engage.
4. Route the T-Connector ends with the Green wires out
from behind the trim panel under the plastic threshold to the
passenger side of the vehicle.
5. Repeat step 3 for the right (passenger) side of the vehicle
using the T-Connector ends with the Green wires.
6. Returning to the left (driver's) side, locate a clean
accessible mounting location on the vehicle near the wiring
harness ends within reach of the White wire and grounding
eyelet, drill a 7/64" hole. Mount the White wire using the
ground screw and eyelet provided.
Caution: Take care not to drill through the body or
any exposed surface.
7. Route the 4-Flat trailer connector out from beneath
the left (driver's) side trim panel into the cargo area of the
vehicle.
8. Confirm T-Connector operation with a test light or by
using a properly equipped trailer.
9. Return the threshold and all trim panels back to their
proper locations securing them with the cargo net hooks
removed in step 2.
Publicidad
