For Your Safety; Obligations Of Personnel - Würth BST 350 Traducción Del Manual De Instrucciones De Servicio Original

GB
Please read and comply with
these operating instructions
prior to the initial operation
of your tool.
Keep these operating instructions for
later use or for a subsequent owner.
Prior to first use always read the safety
■
instructions!
— Failure to observe the operating instructions
and the safety instructions could result in dam-
age to the appliance and danger for the oper-
ator and other persons.
All persons involved in the commissioning,
■
operation, maintenance and upkeep of the
tool must be appropriately qualified.
Obligations of the operating company
The operating company undertakes that only those
persons may work with the tool, who
— are fully conversant with the underlying regu-
lations on health and safety and accident pre-
vention, and who have been instructed on how
to use the tool.
— have read and understood these operating in-
structions, in particular the "Safety instructions"
chapter
The working methods of personnel must be
checked at regular intervals to ensure they are
working safely.

Obligations of personnel

All persons working with the tool undertake that
before starting work they will
— follow the underlying regulations on health and
safety and accident prevention
— read these operating instructions, in particular
the "Safety instructions" chapter.
Before leaving the work station ensure that even
if they are not present, no personal injuries or
property damage could occur.
18

For your safety

Prohibition of unauthorised modifi-
cations and conversions
Modification of the tool or manufacturing
of additional devices is not permitted. Such
modifications can result in personal injury or
malfunctions.
Repairs to the tool may only be carried out by
■
appointed and trained personnel. Always use
Würth original spare parts. This is to ensure
and maintain safe operation of the tool.
Signs and symbols in these instructions
The signs and symbols in these instructions should
help you to use the instructions and the tool
quickly and safely.
Handling steps
■
The defined sequence of handling steps facili-
tates correct and safe use of the tool.
3 Result
This is where the result of a handling step
sequence is described.
[1] Item number
Item numbers are indicated in the text with
square brackets [].
Information
Information tips inform you about the
most effective or practical use of the
tool and these instructions.