Checking The Mowing Head And Cutting Attachment; During Operation; Using The Trimmer - Stihl FSA 45 Manual De Instrucciones

Ocultar thumbs Ver también para FSA 45:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
15.2 Checking the Mowing Head and Cutting
Attachment
WARNING
To reduce the risk of injury from damaged or broken parts,
check the condition of the trimmer, mowing head and cutting
attachment before starting work and at regular, short
intervals thereafter. Do not operate the trimmer with broken,
damaged or malfunctioning parts, @ 5.7.1.
Before starting work, and periodically thereafter, check the
mowing head and cutting attachment for wear or damage:
► Switch off the trimmer and remove the activation key.
A
► If the wear mark (A) on the mowing head becomes visible,
do not use the trimmer. Have the mowing head replaced
before operating the power tool.
► Replace the polymer blades if they reduce in length to less
than 1.8 in. (45 mm) (shown by distance a, above).
Always replace both polymer blades or both pieces of
nylon line at the same time.

16 During Operation

16.1 Using the Trimmer

WARNING
To avoid serious or fatal injury, avoid contact with the
moving cutting attachment, @ 5.7.4.
26
WARNING
To reduce the risk of personal injury, never work with the
trimmer in the rain or in wet or damp conditions, @ 5.5.
Always wear proper clothing and protective apparel,
including proper eye protection, when operating your
trimmer, @ 5.4. Keep bystanders at least 50 ft. (15 m) away
from the work area, @ 5.7.4. Work carefully and maintain
proper control of the trimmer, @ 5.7.2.
The trimmer is designed for two-handed operation.
a
► Swing the trimmer back and forth carefully in a controlled
arc parallel to the ground.
► Move forward slowly, keeping two hands on the trimmer at
all times.
When trimming, a bump guard (1) limits the cutting range of
the mowing line and helps prevent unwanted damage to
vegetation in certain circumstances. Always remove the
activation key before mounting or adjusting the bump guard.
If the trimmer is used or stored at ambient temperatures
above 86 °F (30 °C), its runtime and performance may be
reduced.
Runtime and cutting performance depend on a number of
factors, including ambient temperatures, the type of grass
being cut, the age and condition of the integrated battery
and the type of cutting attachment being used.
16 During Operation
1
0458-718-8621-A

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido