Descargar Imprimir esta página

Special Functions; Sts Features - Sigma Topline BC 16.12 Manual Del Usuario

Ocultar thumbs Ver también para Topline BC 16.12:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
2. Functions / Properties

2.2 Special functions

– Hiding total values during the trip
BC 16.12 STS receives speed signals, all the total
functions (distance, time) are hidden on the display.
If no speed values are received, the functions are
once again displayed.
– Showing and hiding cadence functions
BC 16.12 / BC 16.12 STS are used without the
cadence transmitter, all the cadence functions
(cadence / Ø cadence) are hidden for this trip after
five minutes.
– Trip section (TS) counter
distance / time counter that is manually started and
stopped. The trip section counter makes it possible
to evaluate a trip section or interval training session
without influencing the total values for the trip.
16
If the BC 16.12/
If the
This is a separate

2.3 STS features

– Synchronization
Attach the BC 16.12 STS to the
bracket – zeros flash for the speed and cadence.
There are two ways of synchronizing the speed /
cadence:
– 1.
Start cycling – the receiver usually
synchronizes with the transmitters after 3-4 wheel /
pedal rotations.
– 2.
Spin the front wheel or turn the pedals until
the speed / cadence values stop flashing.
Removing the BC 16.12 STS from the bracket
severs the connection.
1
2

Publicidad

loading

Este manual también es adecuado para:

Topline bc 16.12 sts