Polycom C100S Guia Del Usuario página 6

LED.Light.Ring.Indications
State
Mute
Call on Hold
Incoming call
Idle
Off hook, call being set up, or in an active call
Setup
Insert the Setup Wizard CD
included with your package and
follow the onscreen instructions.
When prompted, connect the
Polycom Communicator C100S
®
to the port on your computer in the
following manner:
Flip open the back cover of the
Polycom Communicator C100S unit.
®
Unwind the USB cable.
Open up the back cover/stand
to its locked position.
When the unit has been connected,
complete the software and
hardware installation as per the
onscreen instructions.
Polycom Communicator User Guide - 
®
LED Light Ring Indication
Solid Red
Solid Green
Flashing Green
Clear
Solid Green
(For best acoustic performance, the
unit is designed to stand at a 40º
angle to the surface it rests upon.)
Insert the USB cable of the unit
into a USB port on your computer.