Cleaning Programs; Rinsing The Device; Rinsing The Milk System - SEVERIN S2+ One Touch Instrucciones

6. Remove the grounds container and empty the coffee grounds.
7. Clean both parts and the cup tray with clear water and a mild detergent.
8. Remove the coffee-milk dispenser by pulling the whole part out of the
guide towards the bottom using the handles (Fig. 9).
9. Pull the milk frother nozzle at the connection for the supply out of the
coffee-milk dispenser towards the top (Fig. 10).
10. Clean both parts with clear water and mild detergent.
11. Put the drip tray (Fig. 11) and the other parts back together and push the
drip tray and the coffee-milk dispenser back into the device.
NOTE!
The drip tray including grounds container and the
coffee-milk dispenser can be put in the dishwasher.
8.2

Cleaning programs

The device has automatic cleaning programs. These can be started from the
menu at any time.

8.2.1 Rinsing the device

The coffee system is rinsed automatically each time it is switched on/off in
order to guarantee evenly high quality of the coffee preparation. In addition,
you can actively trigger a rinsing.
1. Press the menu button for at least 3 seconds and use the e-Select to
select the
cleaning
menu option.
2. Then select the
rinSing
menu option.
and press the e-Select.
Version 4 2014-11
The display shows:
Â
rinSing
The rinsing is complete as soon as "Beverage selection" appears
again.

8.2.2 Rinsing the milk system

For hygienic reasons, as well as to ensure consistently high quality when
preparing milk coffee specialities, the milk system must be rinsed.
1. Press the menu button for at least 3 seconds and use the e-Select to
select the menu option.
cleaning
2. Then select the
milk unit
menu option and press the e-Select.
The display shows:
Â
pleaSe place milk tuBe in water Jar
3. Plug the milk tube onto the connection on the coffee-milk dispenser and
hang the other end of the tube in a container filled with 200 ml clear,
cold water.
4. Press the e-Select to confirm.
The display shows:
Â
pleaSe poSition container
5. Place a cup with a capacity of at least 200 ml on the cup tray below the
coffee-milk dispenser of the device and adjust the height of the coffee-
milk dispenser to the cup height.
6. Press the e-Select to confirm.
The display shows:
Â
milk unit
The rinsing of the milk system is complete as soon as "Beverage
selection" appears again.
GB
57