Cleaning The Bean Container; Troubleshooting - SEVERIN S2+ One Touch Instrucciones

The brewing unit is now inserted correctly.
Â
9. Close the brewing unit again with the door.
8.4

Cleaning the bean container

The bean container must be cleaned regularly to prevent contamination. Ide-
ally this is done when the supply of beans is used up and before new beans
are added.
CAUTION!
There is a danger of damage to the device if
objects fall into the bean feed.
– Switch the device off before starting cleaning.
– Do not let any objects fall into the bean feed.
Here's how to clean the bean container:
1. Switch the device off and disconnect the plug.
2. Wipe the bean container with a dry, lint-free cloth.
Version 4 2014-11

9. Troubleshooting

In addition to the cleaning messages, the display also shows an appropriate
message in case of a technical fault.
WARNING!
When opening a defective unit, there is a danger
of injury.
– Never repair a defective device yourself. In
case of a technical defect, contact SEVERIN
customer service.
Display Cause
The brewing unit
pleaSe
must be cleaned.
clean Brew-
ing unit.
The brewing unit is
check Brew-
not inserted correctly.
ing unit and
inSert.
The bean container
pleaSe re-
is full.
fill BeanS.
The door of the brew-
Brewing unit
ing unit is not closed.
door open.
Remedy
Clean the brewing unit (►"8.3
Cleaning the brewing unit").
Insert the brewing unit (►"8.3
Cleaning the brewing unit").
Fill the bean container with
beans
(►"Preparing coffee speciali-
ties").
Properly close the door of the
brewing unit.
63
GB