User Interface And Navigation - Hach Polymetron 9610sc SiO2 Manual Del Usuario

Table of contents
User interface and navigation
Startup on page 6
Set up the reagents and standards
Measure a grab sample or standard
Set up the system on page 11
Safety information
Refer to the installation user manual for general safety information, hazard descriptions and
precautionary labels descriptions.

User interface and navigation

Keypad description
Refer to Figure 1 for the keypad description and navigation information.
Figure 1 Keypad description
1 Display
2 Navigation keys RIGHT, LEFT: switch
measurement displays, select options, navigate
data entry fields
3 Navigation keys UP, DOWN: scroll menus, scroll
measurement channels, enter numbers and letters
4 Home: go to the main measurement screen
5 Enter: confirm and open sub-menus
Display description
Refer to Figure 2 for the measurement screen descriptions. Refer to
descriptions.
on page 3
on page 10
on page 10
Configure the outputs on page 13
View data on page 17
Use an SD card on page 19
Calibration on page 19
6 Diag: enter the DIAG/TEST MENU
7 Cal: enter the CALIBRATE MENU
8 Back: go back to the previous menu
9 Menu: select options from the analyzer main menu
Figure 3 for the system status
English 3