Technical Data; Electrical Data; Temperatures; Miscellaneous - Grundfos DPI Instrucciones De Instalación Y Funcionamiento

7. Technical data

7.1 Electrical data

Voltage supply to the sensor:
PELV (protective extra low voltage)
(EN 60335-1)
Load:
Output signal, 3-wire:
Enclosure class:

7.2 Temperatures

Temperature at sensor:
Ambient temperature:
Storage temperature:

7.3 Miscellaneous

Cable length:
Cable length for DPI kit 2:
Max. air humidity:
Pressure range DPI:
Pressure range DPI kit 2:
Conversion of SI units into US units, see page 15.

8. Service

If the sensor is defective, replace the sensor.

9. Disposal

This product or parts of it must be disposed of in an environmentally sound
way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest Grundfos company or service
workshop.
14
12 - 30 VDC
24 V: max. 500 ohm
16 V: max. 200 ohm
12 V: max. 100 ohm
4 - 20 mA
IP 55 (according to EN 60529)
–10 °C to +70 °C
temporarily (max. 10 min.) up to 80 °C
–10 °C to +70 °C
–40 °C to +80 °C
0.9 m
5 m
95 %
0.... 0.6, 1.0, 1.6, 2.5, 4.0, 6.0, 10 bar
0.... 1.2, 2.5, 4.0, 6.0, 10 bar