Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STRAP MOUNTING
Attachments (D) with screws on the outer face of the lugs
The 4 socket head screws (hexagon socket/1.3 mm
diameter) mount the strap to the case attach-
ments. These screws must be handled carefully,
using the 2 tools supplied with the watch in its
box.
Attachments (D) with no visible screws
A spring bar is used to fit the strap to the case
5
attachments. This bar must be removed carefully
using the appropriate tool provided with the watch
in the box.
IMPORTANT
As with all mechanical watches with a date func-
*Quickset date setting.
tion, quickset date setting (crown in position 1) MUST NOT UNDER ANY CIR-
CUMSTANCES be carried out between the times of 9 P .M. (21:00) and 3 A.M.
(03:00).
Water resistance.
Once the watch is set, to ensure perfect water resistance,
push the crown back to position 0. Never operate the crown underwater.
The 4 slotted screws (C) mount the bezel to the case and ensure the
Note:
water resistance of the watch. To benefit from the Bell & Ross warranty, these
screws must never be unscrewed.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the
watch and strap with fresh water. It is also recommended to have the water
resistance of your watch checked every two years.
INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be acti-
vated at the time of purchase by your approved Bell & Ross point of sale, and
presented every time an intervention is performed. You can now access the
digital version of this card and all the information relating to your watch by
scanning the QR code or visiting:
www.bellross.com/warranty
To ensure a service that meets the brand's exacting standards, any servic-
ing of your watch must be carried out by the Bell & Ross service centre or a
watchmaker approved by Bell & Ross.
ENGLISH
Publicidad
Tabla de contenido
