Using The Chronograph - Bell & Ross BR 05 CHRONOGRAPH BR-CAL.301 Noticia Técnica

0 1 2 3

USING THE CHRONOGRAPH

The chronograph function can measure time in minutes and seconds.
60 seconds counter
0 1 2 3
30 minutes counter
Measuring a time period
First press of Pusher P1: sets off the time measurement.
Second press of Pusher P1: stops the time measurement.
0 1 2 3
P
1
Third press of Pusher P2: stops and resets the chronograph.
Measuring a time period with an interruption
First press of Pusher P1: sets off the time measurement.
Second press of Pusher P1: stops the time measurement.
Third press of Pusher P1: restarts the time measurement.
P
2
This allows one or more time intervals to be subtracted from the total time measured.
Fourth press of Pusher P1: stops the time measurement.
Fifth press of Pusher P2: stops and resets the chronograph.
P
1
P
2
8
IMPORTANT
Magnetic fields. Magnetic fields can adversely affect the accuracy of your watch. Also, we would recommend that you
avoid placing your watch near electronic devices that may generate large magnetic fields (radio, smartphone, television,
computer, tablet, loudspeakers, etc.).
NOTE : The slotted screws mount the bezel to the case and ensure the water resistance of the watch. To benefit from the
Bell & Ross warranty, these screws must never be unscrewed.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the watch and strap with fresh water. It is
also recommended to have the water resistance of your watch checked every two years.
BELL & ROSS INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be activated at the time of purchase by your approved
Bell & Ross point of sale, and presented every time an operation is performed. You can now access the digital version of
this card and all the information relating to your watch by scanning the QR code or visiting:
www.bellross.com/warranty.
To ensure a service that meets the brand's exacting standards, any servicing of your watch must be carried out by the
Bell & Ross service centre or a watchmaker approved by Bell & Ross. The warranty does not, however, include:
. Any damage caused by accidents or by inappropriate or improper use of the watch (e.g. violent impacts, crushing,
rough handling of the clasp).
. Any damage caused by repair or disassembly operations carried out by a retailer or after-sales service centre not
approved by Bell & Ross.
. The consequences of the watch and bracelet/strap ageing and normal wear and tear.
9