Berner BAP 14-15 SE Manual Original página 16

3 41 01 188 06 0.book Seite 1 Mittwoch, 5. Dezember 2012 9:48 09
Original Instructions for Angle Polisher.
Symbols, abbreviations and terms used.
Symbol, character Explanation
General prohibition sign. This action is prohibited!
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and
the General Safety Instructions.
For a better understanding, unfold the fold-out page at the beginning of this
Instruction Manual.
Before commencing this working step, pull the mains plug out of the socket.
Otherwise there will be danger of injury if the power tool should start unin-
tentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
This sign indicates a possible dangerous situation that could cause severe or
WARNING
fatal injury.
Confirms the conformity of the power tool with the directives of the European
Community.
Worn out power tools and other electrotechnical and electrical products
should be sorted separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø Diameter of a round part
For your safety.
Read all safety warnings and all
WARNING
instructions. Failure to follow
the warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future refe-
rence.
Do not use this power tool before you
have thoroughly read and completely
understood this Instruction Manual. The docu-
ment mentioned should be kept for later use
and enclosed with the power tool, should it be
passed on or sold.
Please also observe the relevant national indus-
trial safety regulations.
English - 1