Average Function; Erasing Data; Irregular Heart Beat Detector; Low Battery Indicator - Braun ExactFit 5 Manual Del Usuario

Ocultar thumbs Ver también para ExactFit 5:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50

Average function

Press the average button
LCD. Press the average button a second time to show the morning average of past
7 days on LCD. If results indicate morning hypertension, the following icon will be
shown
. Press the average button a third time to show the evening average
of past 7 days on LCD. Press the average button a fourth time to show the full day
average of past 7 days again.

Erasing data

Switch off the device, press and hold memory button
more than 5 seconds, LCD display will blink "dEL ALL". Ensure
that the correct user; A or B, is selected before use.
Press memory button
all the stored data of corresponding user have been deleted.

Irregular heart beat detector

The appearance of this symbol
measurement. Talking, moving, shaking or an irregular pulse during the measurement can result in the
appearance of this icon. Usually this is not a cause for concern, however, if the symbol appears often,
we recommend you seek medical advice. The device does not replace a cardiac examination, but
serves to detect pulse irregularities at an early stage.

Low battery indicator

When the low battery indicator
batteries need to be replaced with alkaline LR6 (AA) batteries.
** After replacing batteries, ExactFit™ 5 will go into time-setting mode automatically and show
the last measurement time on screen. Please set the current date / time before taking the next
measurement to get correct average result.

Storage and cleaning

• Always keep the unit in the carrying case after its use.
• Do not put the item directly under the sunlight, in high temperature or humid and dusty places.
• Do not store in extremely low (less than -20°C) or high (more than 60°C) temperature.
• Use a piece of cloth with water or mild cleansing agent to clean the case and then use a piece of dry
cloth to wipe it dry. Use a piece of dry cloth to wipe the cuff when it is dirty.
• Do not use any strong cleansers to clean it.
• When the unit is not to be used for a long time, remove the batteries.
(Batteries may leak or cause harm).
• Do not modify the device. NEVER open the device! This will make the manufacturer's warranty invalid.
8
(5) to show the full day average of past 7 days on
M
(2) again, LCD will display "---" to show
signifies that a certain pulse irregularity was detected during the
flashes on the display, it means the battery is low and the four
D
M
M
(2) for
A
A
A
P
A

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bp 6200

Tabla de contenido