Projector Alignment; Swivel Adjustm En Ttop View; Issued: 12-26-07 Sheet #: 055-9496 - PEERLESS PARAMOUNT PPF Manual Del Usuario

Projector Alignment

If screws indicated are fully tightened, loosen screws half a turn using allen wrench (M) to allow for adjusting tilt,
6
swivel and roll. Align projector to the desired position and fully tighten screws.
WARNING
• Do not loosen adjustment screws to the point they
become disengaged from the mount. Weight of the
projector should be supported in case of accidental
disengagement.
SCreWS (FrONT
AND BACk) FOr
rOLL ADjUSTMeNT
SCreWS FOr SWIveL
ADjUSTMeNT
20° (±10°) SWIveL
SWIVEL ADJUSTM EN T
TOP vIeW
Visit the Peerless Web Site at www.peerlessmounts.com
20° (±10°) rOLL
R OL L A D J U ST MEN T
FrONT vIeW
8 of 24
All other brand and product names are trademarks or registered trademarks of their respective owners.
SCreWS (BOTH
SIDeS) FOr TILT
ADjUSTMeNT
35° (+30°/-5°) TILT
TILT A D JU ST M EN T
SIDE VIEW

ISSUED: 12-26-07 SHEET #: 055-9496-2 10-16-08

For customer care call 1-800-865-2112 or 708-865-8870.
© 2008, Peerless Industries, Inc. All rights reserved.