Publicidad
Step 29
Step
å
Insert a SLIDE CAM (10A) into the SMALL DRAWER SIDES (D12 and D13).
å
Fasten the DRAWER RIGHT (40CC) to the SMALL RIGHT DRAWER SIDE (D12)
and the DRAWER LEFT (40CD) to the SMALL LEFT DRAWER SIDE (D13). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #2 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in
the SLIDE.
3
4
www.sauder.com/service
Roller end
1
2
Drawer Slide
Center the screw in the oval hole.
10A
D13
D12
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
426140
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
3
4
3S
5
Roller end
1
2
Page 35
Publicidad
