American Standard Elevate 2947SW T36 Manual Del Propietário página 10

POST INSTALLATION CLEAN-UP
Remove all construction debris. Install any accessories, shelves or doors according to manufacturer's
installation instructions.
Post installation clean-up can be completed using 50/50 mixture of isopropyl alcohol and water.
AFTERCARE AND CLEANING
WARNING: Cleaning products with labels that say "not suitable for use with ABS, acrylic or polystyrene"
!
SHOULD NOT BE USED. Read all labels carefully.
Clean shower walls with warm soapy water and soft sponge. For stubborn stains, use a 50/50 mix of isopropyl
alcohol and water.
HARSH CHEMICALS SHOULD NEVER BE USED ON SHOWER WALL SURFACE. Clean after use with a mild
liquid household detergent cleaner. Do not use Lestoil , Lysol Disinfectant (spray or concentrate), or Lysol
® ® ®
Basin,Tub and Tile Cleaner, Windex , Mr. Clean , Dow Disinfectant Bathroom Cleaner, or cleaning products in
® ® ®
aerosol cans.
Do not use wire brushes, knives or sharp objects to remove stains or other surface blemishes.
Abrasive cleaners or powders should not be used as they will dull the surface.
Do not allow nail polish remover, acetone, paint remover or other solvents to come into contact with the surface.
Spic And Span® Is A Registered Trademark Of The Spic And Span Company