Descargar Imprimir esta página

Arper STACY Manual De Instrucciones página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
Manutenzione / Care instructions / Pflege / Entretien /
Mantenimiento / お手入れ
— EN
Polypropylene: Dust and ordinary stains can be removed by using a soft sponge
or cloth dampened with lukewarm water. Do not clean with stain removers or other
aggressive products. Use a soft white cloth and clean with circular movements to
avoid scratches. Do not use abrasive products or solvents.
Chromed or lacquered surfaces: clean using extra-strong products like standard home
detergents diluted in lukewarm water. Do not use abrasive products or products
containing acids or bleach. Do not use synthetic fiber or metal sponges or pads which
may scra tch the surfaces. Rinse thoroughly to prevent product residues to damage the
special finishing causing tarnish or oxidation.
After rinsing, dry with a suede cloth. Polishing products for chromed or lacquered
surfaces should not be used: they should only be used by trained staff and with the
outmost care since the polishing process may irreparably damage the surfaces.
Fabrics: Regular cleaning is important in order to maintain the upholstery appearance
in the best conditions and extend its life. Dust and dirt wear the fabric.
Clean frequently with a vacuum cleaner (possibly at low suction), preferably every
week. Non-greasy stains can be eliminated by dabbing them gently with a clean cloth
that does not leave hairs or a sponge dipped in clean, hot water and then wrung out
well. After that, if necessary, dip it into soapy water or into water containing
dishwashing liquid (see formulas). Then dip the surface into clean lukewarm water.
Formulas: The soapy solution consists of ¼ deciliter soap flakes per liter of hot water,
which must then be cooled before use.
The solution with dishwashing liquid is made up of max 1 teaspoon of detergent per
every liter of water.
If you use concentrated products, pour only a few drops into each liter of product.
Faux leather: Clean with a cloth dampened with lukewarm water.
Leather: Do not use water as it would leave marks. Use high-quality detergents and
strictly follow the instructions given by the manufacturer.
In case of doubts, try the product on a hidden area and wait at least 24 hours in order
to make sure it does not damage the leather.
8

Publicidad

loading