Sauder Summit Station 425015 Folleto De Instrucciones página 15

Step 10
First, fi ll the hole in the TOP (T) 1/4 to 1/2 full with GLUE (54M).
å
Then, fasten the LEFT END (B) and MODESTY PANEL (C) to the
å
TOP (T). Tighten four HIDDEN CAMS.
NOTE: Be sure the WOOD DOWEL in the LEG (Q) inserts into
å
the TOP. Wipe away the excess GLUE.
The large hole
must be here.
www.sauder.com/service
C
T
425015
Maximum
210 degrees
Minimum
190 degrees
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
B
Q
Meet Part (T). This component has
been engineered to be lighter, stronger,
faster... well ok. Not technically faster.
But defi nitely makes for a sturdier
Desk that' s easier to assemble and
friendlier to the environment.
Arrow
Caution
!
54M
Page 15