Sauder Summit Station 425015 Folleto De Instrucciones página 23

Step 18
1
D14
F
Groove
Insert the FILE DRAWER SIDES (D14 and D15) at an angle
å
into the slot at each end of the FILE DRAWER FRONT (F).
3
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Fasten the FILE DRAWER BACK (D78) to the FILE DRAWER SIDES (D14 and D15).
å
Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure the FILE DRAWER BOTTOM (D716) inserts into the groove of the
å
FILE DRAWER BACK (D78).
www.sauder.com/service
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D15
D78
D716
D14
VIEW THE T-LOCK BOX VIDEO
2
D14
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the FILE DRAWER BOTTOM (D716) into the
å
grooves in the FILE DRAWER SIDES (D14 and D15) and
FILE DRAWER FRONT (F).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D15
425015
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the groove.
U n fi
n i s h
s u r
e d
f a c
e
D716
D15
F
30S
(4 used in this step)
Page 23