Activating The Watch Always On Feature; Watch Only Mode - Samsung SM-R840 Manual Del Usuario

Getting Started
Customise a watch face with a photo
Apply a photo as your watch face after importing a photo from your mobile device. Refer to
Importing images from your mobile device
from a mobile device.
1
Tap and hold the Watch screen and rotate the bezel or swipe to the left or right on the
screen, and then tap Customise of the My Photo+ watch face.
2
Tap the screen and tap Add photo.
3
Select a photo to apply as a watch face and tap OK → OK.
Double-tap the image, spread two fingers apart, or pinch an image. When the photo is
zoomed in, swipe the screen to make a part of the photo appear on the screen.
To add extra photos, rotate the bezel clockwise or swipe to the left on the screen and
select Add photo. Up to twenty photos can be added as the watch face. The photos
you add will rotate in a row.
4
Swipe the screen to change the colour or font and tap OK.

Activating the watch always on feature

You can set the screen to always display the time when the screen is turned off while you are
wearing your Galaxy Watch3.
Open the quick panel by dragging downwards from the top of the screen and tap
Alternatively, on the Apps screen, tap
then tap the switch to activate it.

Watch only mode

You can use your Galaxy Watch3 in watch only mode. In watch only mode, only the time will
display and all other functions cannot be used.
Open the quick panel by dragging downwards from the top of the screen and tap
Alternatively, on the Apps screen, tap
menu. Then select Power mode → Watch only and tap
To deactivate watch only mode, press and hold the Home key for more than three seconds.
for more information about importing photos
(Settings) → Watch faces → Watch always on, and
(Settings) and tap Battery to open the battery
.
36
.
.