Iso Din Radio Provision With Pocket - Metra INST-123KI Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Determine which trim plate to use according to the
chart and attach the brackets to the trim plate. (Figure A)
2. Slide the pocket into the bottom opening of the trim
plate/bracket assembly and secure the pocket using
the included (4) 3/8" Phillips screws. (Figure B)
Figure A
INST-123KI
Kit Assembly
3. Remove the metal DIN sleeve and trim ring from the
aftermarket radio.
4. Slide the radio into the opening above the pocket
and secure using the hardware that came with the
radio. (Figure C)
Figure B
8
®
5. Locate the factory wiring harness and antenna
connector in the dash. Metra recommends using
the proper mating adapter from Metra or AXXESS.
Test the radio for proper operation.
6. Reassemble the dash in reverse order of disassembly.
Figure C