Preparing For Operation; Installing The Exhaust Host; Window Slider Kit Installation - Carrier 51QPD009N Serie Manual De Instrucciones

3. PREPARING FOR OPERATION

CAUTION
The unit should be placed on a firm foundation to minimize noise and vibration. Make sure the floor is strong
enough to support the unit.
Never place any obstacles around the air inlet or outlet of unit.
3.1 INSTALLING THE EXHAUST HOSE

3.3.1 Window slider kit installation

Clearance from other obstracles
A:30cm-100cm
How to install the window slider kit
Seal sponge
Seal sponge
B:≥30cm
OR
– 6 –
Minimum: 67.5cm
Maximum: 123cm
bolt
Window slider kit
Seal sponge
Window slider kit
Window slider kit
Seal sponge
Seal sponge
Seal the gap between
window sashes
Seal sponge
Seal the gap between
window sashes
G B