Angelcare AC315 Manual Del Usuario página 11

5.1 - SENSOR PAD
TO ACTIVATE/DEACTIVATE THE SENSOR PAD:
02:04 68°F
TO TEST THE SENSOR PAD:
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
MOVEMENT ALARM
• If NO movement is detected after 15 seconds you will hear a single 'TIC'
pre-alarm sound from the Camera.
• If after a further 5 seconds there is still NO
movement detected both the Parent Unit and
Camera speakers will emit loud continous beeps. -
this is the movement alarm.
• Movement Alarm icon will show on the LCD screen.
PAUSING AND RESTARTING THE SENSOR PAD:
Allows you to pause the Sensor Pad if you remove baby from the crib, e.g. for feeding or comforting.
IMPORTANT
• If you do not pause the Sensor Pad, the alarm will sound if there is no movement after 20 seconds/if baby is
removed from the crib.
• Ensure to unpause the Sensor Pad before putting baby in the crib.
1) In the Sensor Pad settings, press the
deactivate the Sensor Pad (when activated the toggle will turn blue).
2) Press the down arrow
highlighted in blue then Press the
2
1) After activating the Sensor Pad, the alarm will sound after 20 seconds.
2) Rub you hand over the mattress to confirm the alarm stops.
PAUSE/UNPAUSE Sensor Pad Buttons
button to activate/
till the Save icon at the bottom will be
button to save the settings.
IF THE ALARM DOES NOT SOUND
• Avoid contact with the crib while Sensor Pad is
in operation.
• Place the crib near a supporting wall to reduce
vibrations.
• Adjust the Sensor Pad sensitivity level.
Turn OFF crib mobile, fans, loud music or
•
anything else that may cause vibration.
68°F
E
N
11