Angelcare AC315 Manual Del Usuario página 15

TO SET THE ROOM TEMPERATURE RANGE:
68°F
68°F
17 30
TO ACTIVATE/DEACTIVATE THE CAMERA TEMPERATURE DISPLAY AND COLOR CHANGING MODE:
Allows you to set the LCD display on your Camera. You can completely turn OFF the display, or set the color
temperature color display on the Camera. With this option the Camera digits light up in colour when the
temperature goes above or below your preferences. The Camera LCD will turn to red if temperature is too hot, blue
if too cold and white if correct.
68°F
68°F
TO CHANGE BETWEEN CELSIUS AND FAHRENHEIT:
68°F
02:04 68°F
°C
1) In the temperature settings menu, select the alarm settings by pressing
.
2) Set the lower temperature limit with the up/down arrows
confirm with
.
3) Press the down arrow
3
in blue then Press the
1) In the temperature settings menu, select the Camera LCD display
setting menu.
2) Press
the down arrow
mode activate/deactivate.
3) Press the down arrow
3
highlighted in blue then Press the
1) In the temperature settings menu, select the temperature unit
setting.
2) Press
°F
3) Press the down arrow
highlighted in blue then Press the
3
. Do the same for the upper limit and confirm with
, the Save icon at the bottom is highlighted
button to save the settings.
to turn the LCD display mode activate/deactivate then press
once and then
, the Save icon at the bottom is
to switch between °C and °F.
until the Save icon at the bottom is
to turn the colour changing
button to save the settings.
button to save the settings.
E
N
and
15