Recharging Of The Batteries; Preliminary Operations Before Starting The Machine; Electromagnetic Brake - NSS CHAMP 2417 RB Manual De Uso

PRELIMINARY OPERATIONS BEFORE STARTING THE MACHINE

!
ATTENTION!
Before starting the machine, always check for any foreign bodies between the brush base (A) and the machine,
or between the squeegee (B) and the machine, that may prevent the brushes base and the squeegee from lift-
ing. This check is necessary if the machine has been turned off without lifting the brush holder base and the
squeegee; when it is turned back on, the brushes base and the squeegee automatically lift.
B
A
THE electric brake (1) controls braking. THE electric brake is integrated in the front in-wheel electric motor 2 drive
system and keeps the machine braked when it is off or when it is on but stopped. The electric brake is equipped with
a lever (3) to unlock and manually move the machine when it is stopped. (for example: when there is no battery). Also
see chapter: "PUSHING/TOWING THE MACHINE".
!
ATTENTION!
The machine does not brake if the electromagnetic brake is released.
NEVER USE THE MACHINE WITH THE BRAKE RELEASED.

ELECTROMAGNETIC BRAKE

3
20
1
2