Operation; Before Startup - Kärcher WD 4.200 Manual De Instrucciones

Ocultar thumbs Ver también para WD 4.200:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Accessory compartment, hook
This accessory compartment allows the
storage of the suction hose and the suction
nozzles.
Rotary switch (ON/OFF)
Position I: Suction or blowing
Position 0: Appliance is switched off
Parking position
 To rest the floor nozzle during work in-
terruptions.
(see description / illustration
Accessory storage container
This accessory compartment allows the
storage of the suction pipes or other acces-
sories.
Turning lock
The turning lock is also used to lock the ap-
pliance head and the container. To unlock,
turn the turning lock all the way into the di-
rection of the arrow until you clear the lock.
Steering roller
 The steering rollers are located in the
compartment when the appliance is de-
livered. These must be attached prior to
starting up the appliance.
(see description / illustration
Filter bag
Note: Do not use a filter bag for wet vacu-
uming!
Recommendation: To vacuum fine dust,
use the filter bag.
Cartridge filter
The cartridge filter must always be installed
- with wet and dry vacuuming.
Note: Let the wet cartridge filter dry prior to
using it for dry vacuuming.
12
Suction hose with handle
 Slide the suction hose into the connec-
tion, it will lock into place.
(see description / illustration
Note: In order to disconnect it, push
down with your thumb and pull the suc-
tion hose out.
Suction tubes 2 x 0.5 m
 Connect both suction pipes and con-
nect them to the suction hose.
(see description / illustration
)
Floor nozzle
(with inserts)
Use the appropriate insert for vacuuming
on hard surfaces and carpets.
Hard surfaces, wet vacuuming: Use the
insert with 2 rubber lips.
Carpets, wet and dry vacuuming: Work
without an insert.
Hard surfaces, dry vacuuming: Use the
insert with 2 bristle strips.
Crevice nozzle
 For edges, joints, heaters and hard to
reach locations.
Always work with an inserted car-
tridge filter - during wet as well as
)
dry vacuum cleaning!
 Illustration
Mount loose parts delivered with appli-
ance prior to start-up.
 Illustration
Recommendation: To vacuum fine
dust, use the filter bag.
– 7
EN

Operation

Before Startup

)
)

Publicidad

Tabla de contenido
loading

Tabla de contenido