Operation
Initial startup
1. Connect the suction hose.
a Latch the suction hose spigot into
the suction opening.
b To remove, press the latching lugs
together and remove the suction
hose spigot.
2.
2. Connect the telescopic suction pipe.
a Press the handle and telescop ic
suction pipe together and latch
into place.
b Press the floor nozzle and tele-
scopic suction pipe together and
latch into place.
1.
English
3. Actuate the telescopic suction pipe
adjustment and adjust the telescop-
ic suction pipe to the desired length.
4. Grasp the mains cable by the plug,
pull out the cable and insert the pl ug
into a power socket.
9