7.
6. Unscrew the door handle and screw it back on
on the opposite side; remove plastic plugs in the
holes intended for these and press them in on the
opposite side.
7. Replace the covers and snap them in.
8. Screw the screw into the locking bolt.
10
6.
9.
9. Remove the hinge covers.
10. Pull out the top angle bracket and insert it on the
opposite side.
11. Pull out the bottom angle bracket and insert it on
the opposite side.
13.
12. Work for second person: Insert the door on the
appliance and hold it tight.
13. Screw on the top hinge, tighten the screws.
14. Screw on the bottom hinge, tighten the screws.
10.
11.
12.
14.