Electrical Connection - Gaggenau RW 404 Instrucciones De Funcionamiento E Instalación

Electrical connection

The electrical outlet to which the appliance is connected
must be easily accessible. Connect the appliance to
110 120 VAC, 15 amp circuit that is controlled by a circuit
breaker or fuse.
d WARNING
Avoid electric shock hazard!
H Plug into a grounded 3 prong outlet.
H Do not remove ground prong.
H Do not use an adapter.
H Do not use extension cords or ungrounded (two
prong) adapters.
Failure to follow these instructions can result in death,
fire, or electric shock.
Improper connection of the equipment grounding con
ductor may result in electric shock. Have the appliance
checked by a qualified electrician or service technician
if you are in doubt as to whether the appliance has
been properly grounded.
Before start up
Clean the interior of the appliance before operating it for
the first time (see "Cleaning the appliance").
Before operating for the first time, rub the stainless steel
surfaces of the door with the included care cloth in the
direction of the grain when they are cold. Appliances that
have already been used must first be pre cleaned with
hot water and a little dishwashing detergent.
After letting them soak briefly, rub the stainless steel sur
faces of the door with a dry, lint free cloth or paper towel.
Repeat this treatment at regular intervals.
Additional care cloths are available from customer
service; ident. no. 00311134.
14
d